Lightweight and extra-compact, this oscilloscope is useful for waveform and frequency tests and voltage analysis with a frequency response of DC to 10MHz. Screen is covered with a graticule marked 10 units wide and 8 units high for convenient and accurate measurements. CRT is 75mm round. A 1kHz 0.25V square wave is available on the front panel, allowing a quick calibration check of vertical and horizontal amplifiers, as well as probe compensation adjustment. Vertical deflection system offers 4 calibrated ranges from 5mV to 5V per division. Horizontal amplifier features 6 calibrated sweep rates from 0.1 microseconds to 10 milliseconds per division with a control to allow continuous sweep rate variation.
Specifications:
Vertical axis Sensitivity: 5mV-5V/div ±3%; 4 cal steps 1-10 sequence Bandwidth: DC-10MHz (within -3dB); AC: 10Hz-10MHz (within-3dB) Rise time: 30ns or less Overshoot: 5% or less Input Impedance: 1M ±5% within 35pF Maximum voltage: 600Vp-p or 300V (AC & DC peak) Operation: Single CH
Horizontal axis Sweep time: 0.1μs-10ms/div ±5%; 6 cal steps 1-10 sequence Linearity: 5% or less Sweep mode: NORMAL, AUTO, EXT Power Requirements: AC 115/230V±10%, 50/60Hz
(
;){kind=link}