200kHz Sweepable Function Generator

View Larger image

This multiple wave form signal generator is ideal for your electronics lab. It produces precision sine, square, or triangle wave forms. Use the unit in a variety of lab applications, including audio experiments, AC circuit studies, wave form experiments, and electronic circuitry testing. For 110 VAC, 60Hz.

2 distinct and separate outputs: 1 variable and 1 fixed at TTL levels (capable of driving 10 standard TTL loads)
Variable output with short-circuit protection
Signals at the variable output are symmetrical around ground with the variable DC offset control off
DC coupled output
600-ohm output impedance
VCO and sweep capabilities
0.2Hz–200kHz frequency range

Includes instruction manual.

Size: 7.5cm x 24.5cm x 18.5cm.

Specifications:

Variable (function) Output

Impedance: Constant 600O5%, short circuit proof
Amplitude: 4 Selectable ranges: 1mV–10mVp-p; 10mV– 100mV; 100mV–1Vp-p; 1V–10Vpp (open circuit)
DC offset: Zero when feature is not selected, variable -5VDC to +5 VDC into open circuit when selected. The total AC (signal) plus DC (offset) output is limited to±10Vp-p into open circuit and ±Vp-p into 600O.
TTL output: Standard TTL-level square wave (in all modes), buffered to drive 10 TTL loads. The rise/fall time is less than 25ns, and synchronous with variable outputs.
Sweep Input: DC coupled, BNC connector
Impedance: 30kO
Sensitivity: 0 to ±10V input sums with voltage at frequency vernier to sweep output frequency up to 100:1; linear sweep range in 10:1, maximum in ±12V
Modes: Frequency range in all modes is 0.2Hz to 200kHz, set with a continuously variable 10:1 frequency vernier and marked in 45 steps and 6 decade ranges. The dial is calibrated to ±5% of setting at 10Hz, 100Hz, 1kHz, and 10kHz.
Square: Sine: .1% THD typical; calibrated to <2% up to 100 kHz.
Triangle: Better than 1% linearity.

(0 customer reviews)

Email this Product to a Colleague

Customer Reviews

and share your thoughts with other customers